Wanted to buy, a Pi System 2 Pit Wall Beacon.

Please contact: Pat Assaillit: pat@dqh.com.au

Well selling my STi. The best way to describe this car is it's times. It's fast and reliable. I will sell it as it runs with all good bits in it. I will not describe all bits as there are to many to list.

This car came second in 2009 Production Racing Cars X class and is first at present in 2010 in X class by a big margin.

If you are interest to buy call me and if you want to see it come at the last race meeting 16th October and see the pace of this.

Only interested buyers, thank you.

PRICE: $38,500 neg
CONTACT: 0418620390

Brand New Dash 2 and DL1 Race Technology Data Logger setup.

Complete ready for instalation, comes with OBDII serial interface, external GPS antenna, Dash Buttons.

Unused still in the box.
http://www.mmsport.com.au/products/1340/Combo
http://www.mmsport.com.au/products/1505/OBD-2-Serial-Interface
http://www.mmsport.com.au/products/1504/GPS-Antenna

Cost over $3000 with the interface as well as the extra antenna and button required.

PRICE: $2500 ono
CONTACT: 0410480534

Websites for your team, driver, car or small business. Mumbo Media will design a site to suit your requirements and help get your message across.

I offer everything from the most simple one-page site to complicated multi-page sites. Regardless of the site complexity I make sure it is simple enough so that updating the site is no more complicated than writing an email.

Click the images below to see examples of my work.

Click here to get in touch for a quote or to discuss your new website.

I have a brand New Haltech - Racepak IQ3 Data Logging dash for sale. This one replaced the near new one I had. I had one dead pixel on the older model screen and they sent me a new one of the current updated model. It logs predictive laps via GPS and collects information via inbuilt G meters, keep track of multiple items such as oil and water temp, gear, revs and it has the multi led shift lights that work their way from either side to centre red on shift. It has warning led's if you set them. You can complete track maps and overlay them to enhance your driving or compare lines, braking points and disect every corner as a stand alone. I also have a six meeting old Haltec Platinum Sport 2000 ECU set for my Proton but programmable for anything including V8's Call for this one. The Dash sells for $2300 but I have a quick price.
PRICE: $1,800CONTACT: 0414-670357

Six Ex Trackskill cars for sale.

These cars are for sale "as is". could suit HDT Cup or built into IPC car.

$6,800 ono ea or negotiate for the lot.
PRICE: $6,800 ono ea
CONTACT: Peter 08 9306 8022

A very unique Roadster. It is based on a 1960 Indy Watson Racecar, has a fiberglass body, jig built chassis and uses a 202 (LPG) HQ/HZ running gear. It weighs approx 800kgs and zips around the road &track. It is a fun car & as there is only two registered in NSW it certainly gets the looks.

The car as an Individually Constructed Vehicle (ICV). It was built using a custom chassis, body and a selection of donor parts from the H Series Kingswood’s to comply it for registration.

I built the car in 2003 with Rob Rowe of Rob Rowe Automotive, who is a well known and respected Historic Race Car Builder and first had it registered in December 2003.

Since building the car it has completed around 1,000 klms as I have the prototype which was built in 2002 which I use more regularly

The motor is a standard 202 bottom, with a HQ race cam and the head has had a little work. The gas system runs the Gas Research Carby on the bigger two barrel manifold.

The box is a 3speed M20 and runs back to a standard Banjo rear end.

We currently have four dedicated race cars that are campaigning again this year and a couple more are being built.

PRICE: $29,000 (incl.GST) Negotiable

CONTACT: Rod 0419 468 303

3IO Update
1 Mg Logging Memory Enabled
Pro Analysis Enabled
Dual Lambda Enabled

Comes with a bare loom & connections that needs to be shrink wrapped.

Retail Value New $10500.00

PRICE: $6500.00 ono
CONTACT: 0416 212 048

It's time to sell the Class C 2nd place car for 2009. The car is ready to race and is the cheapest car in Australia at $10k.

It will not come with the Haltech ECU, Racepak Dash or the dry fuel break but I am negotialble on these and would like to sell the whole package complete.

It does come with spare engine, 2 gearboxes and many panels. It has a KAAZ limited slip diff. It will come with the Unichip ECU if you dont want the full package. Over 10 wheels and has near new A048's on the car.

The car must go for the build of my new HSV R8 12 Hour car. Serious offers only please.

PRICE: $10,000

CONTACT: 0414 670 357

Cams approved race car with trailer. Turn key race set up. Location in Brisbane near Lakeside. Can deliver to Lakeside for test run,( has side Mega phone, so will need to change for a full run) or just drop in. Everything done ready to race.

PRICE: $30,000 ono

CONTACT: ph 0428 720 099

3.5l Big Dollar Motor, EFI Haltech Twin Throttle Body, 5spd Supra Gear Box, Borg Warner LSD Diff, CAMS Log Book, Wilwood Front Brakes, Simmons Wheels, Kuhmo Tyres (raced 1 meeting), Spax and Koni Shocks, On vehicle much more to list. As raced at Morgan Park - iRace Series Round 2 Winner of the RocketSports category at recent meeting. Regretful sale - selling for price of motor.

Contact: Matt 0411 736 980

Price: $27,000

Trans: 5 SP MANUAL
Year: 1997
Body: C/CHAS
Engine Size: 8.2l
Fuel Type: diesel
Km's: 170000
Colour: White
Location: NSW - Sydney
Features:
Air Conditioning, CD Player, Power Steering

Description:
This truck is in very good conditiond serviced regularly, It has 22 ft pantech that is used for recording outside Television events locally and interstate, The truck has not carried heavy loads & has not done city driving. It also includes 2 seperate airconditioning units in the pantech, and is fitted with storage bays.

Price: $34,900.00

Contact Tracy: 02 9438 2088 or 02 9438 3099 or thannah@ave.com.au

This car belongs to a friend of mine. It would make a very very good HDT Cup/Muscle Div car.

It is listed on Ebay, so if you need to contact him please do so via Ebay. But if you get really desperate, drop me a line and I'll try and chase him up for you. Jon Worrell.

EBAY LINK

Price: $6,000

WTB Dymag wheels sizes 17x11 and 17x9.5 five spoke wheels. Some of these wheels will have Perkins or Corvette wording cast into them.

Contact Brett Henderson: bv1953@aol.com

4 x 9" Rays rims $550 the set
The rims have served me faithfully and are extremely strong.
Suit RX-7 and some Nissans, Toyotas, Ford, FPV.
+38 offset x 114.3 x 5

4 x Pirelli slicks used for one weekend only. Two heat cycles. $600 the set. The slicks were purchased new for the W300 in November 2008 and were used in Qualifying and the first hour only. Still very usable. Always stored in black bags indoors. They never got mounted on the car in 2009 because I never made it to a race start and I use other rims/tyres for transport and practice.

$990 if you want the 4x 9" rims plus these 4 slicks

OR make an offer if you are buying all 8 Rays Silver Arrow rims with the 4 x Pirelli wets and these 4 slicks

Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.

I am going to Bathurst next week and can take them up there if anyone wants but payment or at least a deposit first. Space is limited.

Delivery arranged anywhere with TNT. Good rate.

Steve 0428 219888

Ok up for sale is my old motor out of my VH Commodore. This motor needs a REBUILD it has spun 2 bigend bearings and the crank is marked and 2 rods look like they have gotten hot. Ok now to the good bits this motor has VN Commodore heads (have been shaved) and also has VN rods BIG cam (I can't remember the spec's But I know it comes on at 3000rpm). The motor is fitted with a Redline single plan manifold with a freshly worked Rochester carby, The motor also comes with a complete Exhaust and a set of Extractors this motor was making over 300HP at the wheels and would be good for any track car and would do well in HDT cup.

If you click on the link below it will take you to a video of the motor going around Bathurst.

http://www.youtube.com/watch?v=hZBTPfpfm3w
PRICE: 1000.00 ono
CONTACT: 0410651606

Strong 17 x 8 Rays Silver Arrow wheels. Currently fitted with Pirelli 225 62 17 wets bought new from Trofeo. Rare item. The wets have done only 8 laps in the wet just to remove the green. Mike Navybox at Wakefield was witness to their running in and supervised me doing so.

They are perfect wets. Never been raced on. No further use. Always stored indoors in black bags. Very soft. They were incredibly grippy when I ran them in in October 2009.

Rims $400 the set
Wets $1200 the set
OR $1400 if you want the 4 rims plus 4 wets mounted

Pick up from Windsor (On main road between Airport and Bathurst) or if you want to get your courier I can co-operate.

I am going to Bathurst and can take them up there if anyone wants next week but payment or at least a deposit first. Space is limited.

Delivery arranged anywhere with TNT. Good rate.

Steve 0428 219888

Motec ADL Complete unit (Ex Nat. Series Formula Ford - V8 Supercar spec unit) Unmarked dash with internal logger, Suit Open Wheeler or Sedan. Price inc: Dash unit, 79 pin Gen. motec Loom with military spec plugs, Various sensors, steering wheel mountable Mode / Select buttons, LED shift light, Beacon, Receiver, Pwr lead, Tri-pod, Battery & Charger

Under half new price. All in Excellent - New Condition. Free postage Australia wide!

PRICE: $6,500 Neg.

CONTACT: 0404804859 or russellnewell@hotmail.com Email for further info and Pics

Sold!

This car has had a full rebuild in the past few months, brand new 253 race motor, rebuilt m21 box, rebuilt diff, 330mm front brakes with VE Twin Spot Calipers, Rear brakes are 315mm with VE rear calipers, new Brake booster mod to fit VX master cylinder, full Pedder suspension including everything possible (Springs, shocks, bushes, adjustable camber tops, adjustable Castor rods), 16" rims with near new Bridgestone Semi Slicks, Sabelt Taurus Race seat with New harness, Car fully rewired front to back. This is a very clean, tidy, reliable, quick car.

This car has a current iRace log book, this car was the original Commodore Cup Display vehicle, Cage was built to commodore Cup Specs.

1st place in Class B 2009 HDT Cup, 2nd Place Overall.

Nothing to spend, ready to race.

Contact me for more specs and pics.

Only selling to upgrade.

Price: $12500

Contact: Troy 0410 480 534

This car was originally built for Proton at great expense. It has Proflex canister shocks with Eibach coil-over springs all round. An excellent rollcage, good brakes - Endless pads all round (new fronts). Rallyart LSD.

This is a great little Class C car and a great way to go racing in 2010. Parts are readily available and relatively cheap.

Has a good engine fitted, gearbox and clutch recently reconditioned. very economical to run and maintain.

6 wheels with Federal/Kumho tyres, also various spares to complete the package including spare engine, drivers door etc.

Has a few minor battle scars from this season which have been allowed for in the bargain price.

$12,500

Can deliver if required. Call Hans on 0414 670 026.

2007 model Mazda 3 MPS Production Racing Car offered for sale. This car won the 2009 Class A Production Racing Car Championship.

2.3 litre Turbo engine, 6 speed manual gearbox, Murray Coote suspension, DBA 4K brake rotors and Endless Enduro pads.

$33,000 or best offer.

Contact Clark Stott or check out the listing on My105.com

Radical SR3 2004 model

2004, SR3 model

1498cc Hayabusa engine

$79850

Contact Rick Otten 0418 251 000 or 0408 471 199 or 02 4861 6626

ALFA 2003 GTA Production Racing Car

• 270 HP

• 3.2 L V6
• 6 Speed Gearbox
• Quaife LSD
• only 2 owners
• Winner 2008 Alfa Series [4 Wins,1 Second]
• 1 min 10.7 Secs Wakefield Park
• 1 min 11.8 WP with 70 Year Old driver
• 1000km only on engine
• Very competitive
• No Accidents
• Original Paint
• 6 Wheels
• 3 Sets of tyres incl. Wets
• Many other Spares
• Great looking and sounding car
• Over $100K New

Reluctant Sale $33,000 or Best Offer
Contact Rick Otten 0418 251 000 or 0408 471 199 or 02 4861 6626

HQ to HZ Holdens wanted, or parts, (a 10 bolt salisbury diff in particular)for rebuilding into Rocket Sports Roadsters.

Contact Graham Smith, phone: 0425 210 267

This very nicely presented, very fast, ex-Yvan Muller 91D Reynard is offered for sale with a comprehensive spares package, and ready to race.

The car has a very strong 3800cc Holden V6 (Ecotec), AiM datalogging, a 5-speed Reynard transmission, and all the features expected of a car of this caliber.

iRace, AASA and CAMS logbooks accompany the car, along with setup data.

$49,000

Contact Rod Dale for further details: 0412 785 486 or rod@irace.net.au

Wanted ROH Reflex commodore wheels as on the Trackskill cars

Contact Robert Marchese: 0419 252 257 rmarchese@robertoatley.com.au

MoTeC ECU#2341, it has logging, lambda, advanced functions. To buy it new would cost $4202.05. I'll sell it for $3250.

Price: $3250

Contact: Steve Manning 0412 611 885

4 x 16x10 Challenger 5 spoke silver mag wheels. Ford 5 stud pattern with 6Neg offset. Great condition.

Price: $800

Contact: Steve Manning 0412 611 885

World class Mitsubishi Race Cars available for lease - Turn-up & Drive!

Mitsubishi MIVEC Mirage ( Colt ) 130kw FWD
Close Ratio 5 speed
Ralliart Adjustable Shocks
Lancer EVO front 2 piston Disc Brakes & disc brake rear
FT3 fuel cell
Full roll cage
5 point Harness
15" wheels 6.5 wide (can use slicks)

Cars on Oran Park South Circuit 50.0 sec laps, GP Circuit 1 min 20 sec laps (with experience)

Happy to help with practice/set-up for any novice driver

Cars have previously been raced by: Warren Luff, Dean Evans, Garry Young, Peter Leemhuis, Kevin Gilkinson, Barrie Nesbitt, Gavin Harvey, just to name a few!!!

Contact: Mal Rose 0428 449 414 or through the website: www.v8experience.com.au

91D Formula Tasman available for lease. Competitive car, affordable deals for one-off round, multi-round or full season.

Price on application. Contact Rod Dale, Mumbo Racing: 0412 785 486.

We have just purchased this car as an unfinished project from a client who has now moved overseas permanently.
The car is a full rolling chassis with a 1300cc Suzuki Hayabusa engine fitted but not running. A set of HPC coated extractors are fitted. The car has new Willwood calipers and master cylinders and connected fully with braided line. The cooling system is in place and connected. Fuel tank, lift pump and surge tank are with the car but not fitted. The wiring has been started, but we have yet to evaluate how much more work is required to complete it. The seat is with the car along with brand new 6 point harness dated 2012 and not fitted. A Carbon Fibre rear wing is fitted.

The car is being offered “as is” at $35,000 o.n.o
We are also happy to finish the car to any stage and negotiate a package that is suitable to your requirements and budget.
Contact: Dennis Holland 0418 284658 or dhholl@ozemail.com.au

EA Falcon Muscle Division/Saloon Car/IPRA etc. CHEAP

New Milton engine with baffled sump - 163.3rwkw have dyno sheet, (only 3 or so meetings old), new 5 speed with short shift (1 meeting old), new front end bushings (1 meeting old), new brakes (1 meeting old), new tyres (1 meeting old), 2 owner car - ex. Andrew Hamilton and built in SA. Its a sister car to Steve K's old EA, minimal use since new, only purchased 10 months ago, spent 8k on it, quick car. Slight panel needed (front right headlight, bonnet, front right guard). BARGAIN!!! Cheap motor racing!

Includes some spares: one full set (4) rims with old tyres, power steering pump, taillight, 102 fuel (1 drum), belts, lap timer for an extra $200, other bits I cannot remember.

Last time at mallala i did a 1:22.7 which is good for the fifth time I have driven the car.

Reason for sale: Have had a change of heart, would prefer IP racing or Open Wheel.

Located in Adelaide - SA

Price: $8000.00 not negotiable. My loss is your gain. I great, cheap car to start racing.

10 months ago I paid $10k for it plus 8k I've spent. Owes me 18k +

http://www.my105.com/classified.asp?id=10921&latest=1

Max de Meyrick
0400 745 196
max.demeyrick@raywhite.com

Two competitive LM Sports Cars available for lease. Deals available for both dry and wet hire.

2003 Minetti, powered by Hayabusa.

2005 Lincspeed (pictured), powered by Honda (long cockpit would suit taller driver).

Price on Application
Contact: Bob Townsend - Ph: 0418 759 321 Email: bob@abcoasttocoast.com.au

Call Kel 0418 493146

Australian Factory racecar. Spaceframe/Composite body, MoTeC ADL/M800, AP Brakes, Koni Shocks + spares, Airjacks. Outstanding power/weight and grip - suitable for all levels of competitor. Full factory engineering/support available. Eligible for LM Sports.
Class/Div: 2A Sports Cars
Make: SAKER
Model: SVS GT
Year: 2003
Engine: Subaru EJ25 STi
Transmission: 5 speed transaxle
External Colour: Blue
Condition: Very Good
Vehicle Location: Melbourne
$79,000 or by negotiation

Contact: Marcus, Phone: 0411 137 230, Email: info@sakercars.com.au

Factory built 1990, Aluminium and carbon tub, Composite body, Nissan SR20 Turbo, Hewland Mk9, Mk5 gears 5 speed + reverse. LSD Quaife. Cockpit adjustable roll stiffness and brake bias, Floating hat brakes. Adjustable Konis, 3 piece Werk centrelock wheels, 510 Kg, Good condition.

Price: $30000 aud ONO
Contact: Jeremy 03 9589 3065 or 0408 538 763

Aluminium and Carbon Tub, Composite body, 13b series 5 Rotary, 4 speed+reverse Hewland Mk9 Mk5 gears, Quaife LSD, Hat Brakes, Cockpit adjustable roll stiffness and brake bias, 3 piece centerlock alloy enkei wheels, F3 slicks, 490kg

Price: $25500 ONO
Contact: Jeremy 03 9589 3065 or 0408 538 763

2003 Minetti
Strong Hayabusa engine with Motec ECU and spare Hayabusa engine
Carbon fibre body with spare front section
Willwood brakes
Wets on rims
Custom trailer available if required
$44,000
Contact: Bob Townsend - Ph: 0418 759 321 Email: bob@abcoasttocoast.com.au

Various components are available for an unfinished V8 Supercar project.
Click here to view the full list.
Contact Mick West, Ph: 0408 899 895

40ft Gooseneck Fully Enclosed race car trailer
Has a/c living area with fridge, microwave, table, sink, beds up front
Workshop area in middle with cupboards and bench mounted air compressor
Rear section big enough to fit HQ holden or Ford in
Includes 30ft annex
Towed by a 1984 CMA86 Nissan UD fitted with dogbox for extra storage & longrange fuel tanks
Complete $29,500
Contact Tony Schaper Ph: 0438 764 876 or Email: tadtow@optusnet.com.au

Newly rebuilt Audi 1.8t engine with Rotrex supercharger
Approx 330+bhp
Forged pistons
Steel rods
New bearings and seals
Ported and polished head
DTA S60 ECU
Pro-alloy charge cooler
New uprated motorsport radiator
Racing Dynamics suspension
Spare springs and loads of spares
Exige front clam fitted
Modified elise rear clam (with mould to duplicate if required)
Carbon Corbeau race seat with FIA approved harnesses
Carbon door panels
Carbon door handle surround
Carbon stack surround
A-Frame with petty bar
2 sets of exige wheels (1 set plus spare with 8 good tyres)
1 set of exige s1 seats without harness holes
FIA approved fire extinguisher
Electric cut off switch
Spare front spoiler
Motorsport front spoiler
$75,000 o.n.o

Car currently in Perth
Ph: 0438 588 561 Email: d.ksutton@bigpond.com